btamono.blogg.se - K dcan cable driver windows 7

*Special thanks to ResearchDesignLab and MKAutoTech for the video guide.

You can now use the other BMW software included in the BMW Standard Tools.

This means that the INPA software had successfully detected your vehicle. Check if there are 2 SOLID Black dots next to the "Battery" and "Ignition" headings.

Run the INPA software on your computer.

Plug the OHP K+DCAN OBD2 interface into your vehicle OBD2 port and connect the USB device to your computer.

If it is, this means that the COM port has been configured correctly and the device drivers were properly installed. See if "USB Serial Port (COM())" is available.

Unplug the USB device and plug it back to the same USB port on your computer.

You need to check if the COM Port has been correctly configured. Be sure that the COM Port number matches with your computer’s COM Port number on Device Manager.

Check the value in the second row, ex: Port=Com1.

Open using a text editor (such as Notepad). EDIABAS is the main communication layer to most BMW diagnostic, coding, and flashing software. It is vital to match your computer’s COM Port number with EDIABAS so that your computer can communicate with the vehicle’s ECU. Step 3 - Check COM Port number on EDIABAS

The BMW Standard Tools will install the following BMW software:.

Install the BMW Standard Tools to your Local Disk (C:).For Windows 10 and 7 users (and 8, 8.1 as well) - right-click on the Installer file to “run as admin” + “compatibility mode”.Run the installer CD on your laptop computer.Change the "Latency Timer (msec)" to 1.You can let it stay as is or you can change it to your preferred COM number between COM1 to COM30. You will find the COM Port number, ex: Port=Com1.Go to Properties, then Port Settings, then Advanced.This can only be done while the device is plugged into the USB port of your computer. Step 2 - Configure COM Port on Device ManagerĬonfigure your laptop’s COM port. Most computers running the latest Windows 10 versions are 64-bit. Choose between 64-bit or 32-bit, depending on the version of your Windows operating system. Download and install the latest version of FTDI drivers for Windows here: If Windows did not automatically detect the USB device, you need to manually install the drivers.Make sure that you are connected to the Internet. Plug the K+DCAN OBD2 USB device into the USB port of your laptop computer and let Windows automatically configure the device drivers.